Ayad knowledge base

Method #2: Source archives/packages

– *** Caution

• You must remove all previous installation of FFmpeg and FFmpeg-Php, then follow installation instructions below.
• Follow these steps (in that order):

First, make sure the following binary packages are installed on your server:

gcc, gcc4, gcc4-c++, gcc4-gfortran, gd, gd-devel, gmake, ImageMagick, ImageMagick-devel, libcpp, libgcc, libstdc++, make, ncurses, ncurses-devel, ruby, subversion

If any of these packages are missing, install them using Yum . For example:

• yum install PACKAGE

*** Caution

• The following source packages are always updated with newer versions. You might experience technical issues if you download and install a newer/older version of any of these applications.
• You must remove all previous installation of FFmpeg and FFmpeg-Php, then follow installation instructions below.

To install FFmpeg from source, execute the following commands (in that order).

1. Let’s create a directory to do our work in:
   • mkdir /usr/local/src
   • cd /usr/local/src
2. Download source packages
   • wget http://liba52.sourceforge.net/files/a52dec-0.7.4.tar.gz
   • wget http://ftp.penguin.cz/pub/users/utx/amr/amrnb-7.0.0.2.tar.bz2
   • wget http://ftp.penguin.cz/pub/users/utx/amr/amrwb-7.0.0.2.tar.bz2
   • wget http://www3.mplayerhq.hu/MPlayer/releases/codecs/essential-ppc-20071007.tar.bz2
   • wget http://downloads.sourceforge.net/project/faac/faac-src/faac-1.28/faac-1.28.tar.bz2
   • wget http://downloads.sourceforge.net/project/faac/faad2-src/faad2-2.7/faad2-2.7.tar.gz
   • wget http://biznetnetworks.dl.sourceforge.net/sourceforge/ffmpeg-php/ffmpeg-php-0.6.0.tbz2
   • wget http://rubyforge.org/frs/download.php/17497/flvtool2-1.0.6.tgz
   • wget http://downloads.sourceforge.net/project/lame/lame/3.98.4/lame-3.98.4.tar.gz
   • wget http://downloads.xiph.org/releases/ogg/libogg-1.1.4.tar.gz
   • wget http://downloads.xiph.org/releases/theora/libtheora-1.1.1.tar.bz2
   • wget http://downloads.xiph.org/releases/vorbis/libvorbis-1.2.2.tar.gz
   • wget http://downloads.sourceforge.net/project/re2c/re2c/0.13.5/re2c-0.13.5.tar.gz
   • wget http://download.m0k.org/handbrake/contrib/xvidcore-1.1.3.tar.gz
   • wget http://downloads.videolan.org/pub/videolan/x264/snapshots/x264-snapshot-20080324-2245.tar.bz2
3. Extract source packages
   • tar xzf a52dec-0.7.4.tar.gz
   • tar jxvf amrnb-7.0.0.2.tar.bz2
   • tar jxvf amrwb-7.0.0.2.tar.bz2
   • tar jxvf essential-ppc-20071007.tar.bz2
   • tar jxvf faac-1.28.tar.bz2
   • tar xzf faad2-2.7.tar.gz
   • tar jxvf ffmpeg-php-0.6.0.tbz2
   • tar zxvf flvtool2-1.0.6.tgz
   • tar xzf lame-3.98.4.tar.gz
   • tar xzf libogg-1.1.4.tar.gz
   • tar jxvf libtheora-1.1.1.tar.bz2
   • tar xzf libvorbis-1.2.2.tar.gz
   • tar xzf re2c-0.13.5.tar.gz
   • tar xzf xvidcore-1.1.3.tar.gz
   • tar jxvf x264-snapshot-20080324-2245.tar.bz2
4. Create the codecs directory & export files
   • mkdir /usr/local/lib/codecs
   • mv /usr/local/src/essential-ppc-20071007/* /usr/local/lib/codecs
   • chmod -R 755 /usr/local/lib/codecs
   • echo “/usr/local/lib” >> /etc/ld.so.conf
   • ldconfig
5. Install SVN and Ruby (for RedHat/CentOS v5.x)
   • yum install subversion
   • yum install ruby
     OR (if you are using the cPanel control panel )
     • /scripts/installruby
     • /usr/local/cpanel/bin/ror_setup
   • yum install ncurses-devel
6. Compile and install FLVtool2
   • cd /usr/local/src/flvtool2-1.0.6/
   • ruby setup.rb config
   • ruby setup.rb setup
   • ruby setup.rb install
7. Compile and install LAME
   • cd /usr/local/src/lame-3.98.4
   • ./configure
   • make
   • make install
8. Compile and install libOGG
   • cd /usr/local/src/libogg-1.1.4
   • ./configure
   • make
   • make install
   • PKG_CONFIG_PATH=/usr/local/lib/pkgconfig
   • export PKG_CONFIG_PATH
9. Compile and install LibVorbis
   • cd /usr/local/src/libvorbis-1.2.2
   • ./configure
   • make
   • make install
10. Compile and install Libtheora
    • cd /usr/local/src/libtheora-1.1.1
    • ./configure –with-ogg-libraries=/usr/local/lib/
    • make
    • make install
11. Compile and install amrNB
    • cd /usr/local/src/amrnb-7.0.0.2
    • ./configure
    • make
    • make install
12. Compile and install amrWB
    • cd /usr/local/src/amrwb-7.0.0.2
    • ./configure
    • make
    • make install
13. Compile and install Liba52
    • cd /usr/local/src/a52dec-0.7.4
    • ./bootstrap
    • ARCh=’arch’
    • ./configure –enable-shared
    • make
    • make install
14. Compile and install FAAC
    • cd /usr/local/src/faac-1.28
    • ./bootstrap
    • ./configure –with-mp4v2
    • make
    • make install
15. Compile and install FAAD
    • cd /usr/local/src/faad2-2.7
    • ./configure –with-mpeg4ip
    • make
    • make install
16. Compile and install XVIDCore
    • cd /usr/local/src/xvidcore/build/generic/
    • ./configure
    • make
    • make install
17. Compile and Install X264 Snapshot
    • cd /usr/local/src/x264-snapshot-20080324-2245
    • ./configure –enable-shared
    • make
    • make install
18. Compile and install RE2C
    • cd /usr/local/src/re2c-0.13.5
    • ./configure
    • make
    • make install
    • cp -aP /usr/local/bin/re2c /usr/bin/
19. Download the latest release for FFmpeg and MPlayer from svn.mplayerhq.hu
    • cd /usr/local/src
    • svn checkout svn://svn.mplayerhq.hu/ffmpeg/trunk ffmpeg -r 15594
    • svn checkout svn://svn.mplayerhq.hu/mplayer/trunk mplayer
    • svn update
20. Compile and install MPlayer
    • cd /usr/local/src/mplayer
    • ./configure
    • make

    (STOP here.) Make sure MPlayer has been compiled successfully with NO errors. Do NOT proceed any further unless the MPlayer package has been compiled successfully.

    • make install
21. Compile and install FFmpeg
    • cd /usr/local/src/ffmpeg/
    • mkdir /usr/local/src/ffmpeg/tmp
    • export TMPDIR=/usr/local/src/ffmpeg/tmp

    (The following ./configure command is one single line)

    • ./configure –enable-shared –enable-nonfree –enable-gpl –enable-pthreads –enable-liba52 –enable-libamr-nb –enable-libamr-wb –enable-libfaac –enable-libfaad –enable-libmp3lame –enable-libtheora –enable-libvorbis –enable-libx264 –enable-libxvid –enable-cross-compile
    • make

    (STOP here.) Make sure FFmpeg has been compiled successfully with NO errors. Do NOT proceed any further unless the FFmpeg package has been compiled successfully.

    • make install
    • export LD_LIBRARY_PATH=/usr/local/lib/
22. Finalize the codec setups:
    (Create symbolic links for the following modules. FYI: the number which comes after the extension *.so might differ from one server to another. The X‘s represent numbers. The number after *.so.5 must match the number after the *.so.5 at the end of the line.)
    • ln -s /usr/local/lib/libavformat.so.5X.XX.0 /usr/lib/libavformat.so.5X
    • ln -s /usr/local/lib/libavcodec.so.5X.XX.0 /usr/lib/libavcodec.so.5X
    • ln -s /usr/local/lib/libavutil.so.49.X.0 /usr/lib/libavutil.so.49
    • ln -s /usr/local/lib/libmp3lame.so.0 /usr/lib/libmp3lame.so.0
    • /sbin/ldconfig
23. Compile and install FFmpeg-Php
    • cd /usr/local/src/ffmpeg-php-0.6.0/
    • /usr/bin/phpize
    • ./configure
    • make

    (STOP here.) Make sure FFmpeg-Php has been compiled successfully with NO errors. Do NOT proceed any further unless the FFmpeg-Php package has been compiled successfully.

    • make install
      Verify that ffmpeg-php module is saved in the Php extensions directory by running:
    • ls -al /usr/local/lib/php/extensions/no-debug-non-zts-20060613/ffmpeg.so
24. Add FFmpeg-Php module directive in php.ini file: (make sure the local path to your php.ini is correct.)
    • echo ‘extension=ffmpeg.so’ >> /usr/local/lib/php.ini
25. Restart Apache to load FFmpeg-Php (for RedHat/CentOS v5.x)
    • service httpd restart

– Testing FFmpeg
Verify that FFmpeg is working properly by running the following two commands:

• php -r ‘phpinfo();’ | grep ffmpeg

You will get a few lines similar to the following:

ffmpeg
ffmpeg-php version => 0.6.0-svn
ffmpeg-php built on => April  15 2010 15:31:45
ffmpeg-php gd support  => enabled
ffmpeg libavcodec version => Lavc51.62.0
ffmpeg libavformat version => Lavf52.18.0
ffmpeg swscaler => disabled
ffmpeg.allow_persistent => 0 => 0
ffmpeg.show_warnings => 0 => 0

This is the second command to make sure that FFmpeg is working properly:

• /usr/local/bin/ffmpeg

If you do not get any errors after running the test commands above, FFmpeg, FFmpeg-Php, MPlayer, MEncoder, FLV2tool, LAME MP3 encoder & libOGG are working properly. CONGRATULATIONS!