Ayad knowledge base

# mdadm /dev/md0 -f /dev/sda1                                  stop the rebuild
mdadm: set /dev/sda1 faulty in /dev/md0
# mdadm /dev/md0 -r /dev/sda1                                  remove the devise to avoid start rebuild again after reboot
mdadm: hot removed /dev/sda1
# mdadm /dev/md0 -a /dev/sda1                                     to start rebuild 
mdadm: hot added /dev/sda1

This entry was posted on Tuesday, September 29th, 2015 at 12:58 am and is filed under Linux. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.