test cpu load
this command is used to increase the cpu load for testing purpose
yes > /dev/null &
Repeat the command N times, where N is the number of CPUs. In my case, I have to execute it four times.
you can get the number of cpu by running the following command cat /proc/cpuinfo or nproc
reference http://knowledge.alzwea.com/wp-admin/post.php?post=1191&action=edit
This entry was posted on Monday, February 24th, 2020 at 6:56 am and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.